# How to Use a Floor Buffer: A Commercial Guide to Technique, Pads and the Right Machine

> How to run a commercial floor buffer: set the handle at hip height, pick the pad for the job, steer with handle weight, and recover the solution. Includes when a burnisher or random-orbit machine is the better tool.

- **URL:** https://janitori.com/blogs/equipment-guides/how-to-use-a-floor-buffer

**In this guide**
- [What is a floor buffer?](#what-is)
- [How to use one, step by step](#steps)
- [Which pad for which job?](#pads)
- [How do you steer it?](#steering)
- [Buffer, orbital or burnisher?](#machine)
- [Mistakes that damage floors](#mistakes)
- [FAQ](#faq)

To use a commercial floor buffer, dust-mop the floor, fit the right pad, lower the handle to about hip height, and guide the machine in overlapping passes by shifting handle weight instead of pushing it side to side. Then recover any solution before it dries and let the floor dry completely.

This guide is for custodial and facility teams running cord-electric rotary floor machines on hard floors. It covers the technique, the pad for each task, and when a random-orbit machine or a high-speed burnisher is the better tool.

 **Key takeaways**
- A floor buffer is a low-speed rotary machine, commonly 175 to 300 RPM, and the pad or brush you fit decides whether it cleans, scrubs, spray-buffs or strips the floor.
- Steer with handle weight. Pressing the handle down swings the machine one way and lifting slightly swings it the other, so a relaxed grip at about hip height gives the most control.
- Match pad to task: red for daily cleaning, white for spray buffing, black for stripping finish. Color codes vary a little by maker, so read the pad label before you commit to a floor.
- Recover the solution before it dries. OSHA requires workroom floors to be kept clean and, as far as feasible, dry, and a wet floor left behind is the most common hazard of this job.

## What Is a Floor Buffer and How Is It Different From a Burnisher?

A floor buffer is a low-speed rotary floor machine, typically 175 to 300 RPM, that swings a pad or brush over the floor for cleaning, scrubbing, spray buffing or stripping. A burnisher is a different machine: it spins far faster to polish finish to a high gloss.

 | Machine | Typical speed | Best for

 | Rotary floor buffer | 175 to 300 RPM | Daily scrubbing, stripping, spray buffing, carpet bonnet work

 | Random-orbit floor machine | 1440 RPM on the Dapper units listed below | Scrubbing and restoration with less swirl marking

 | High-speed burnisher | Commonly 1,500 RPM and up | Polishing finished floors to a high shine

Most buffers are cord-electric and carry a cleaning path between 13 and 20 inches. The larger the path, the faster a crew covers a floor, but a 20 in machine is harder to place in tight rooms.

## How Do You Use a Floor Buffer Step by Step?

Clear and dry-clean the floor, choose the pad, apply the solution, then work in overlapping passes and recover the liquid. Following that order keeps grit under the pad from scratching the floor and keeps water from being left behind.
- **Prep the area.** Close it to foot traffic, move anything the machine could catch, and put out wet-floor signs. NIOSH lists caution signs around wet surfaces as part of safe cleaning procedures ([NIOSH 2013-100](https://www.cdc.gov/niosh/docs/2013-100/pdfs/2013-100.pdf)).
- **Dust-mop or vacuum.** Loose grit and debris get dragged under the pad and scratch the floor, so remove it first.
- **Choose the cleaner.** For routine cleaning use a neutral floor cleaner, and mix it at the rate printed on the label. Extra product leaves residue.
- **Apply the solution.** If the machine has a solution tank, fill it with the mixed cleaner. If not, apply it with a mop and bucket first.
- **Fit the pad or brush.** Unplug the machine, tilt it back, and seat the pad on the driver. Use a brush instead of a pad on grouted or uneven tile.
- **Set the handle.** Lower it to about hip height and lock it. Too high is hard to control and too low strains your back.
- **Buff or scrub.** Start the motor with both hands on the handles, let the machine run flat, and guide it in even, overlapping passes across the section.
- **Recover the solution.** Pick up the slurry with a wet vacuum or squeegee before it dries, then leave signs out until the floor is fully dry. Check the wet vacuum's recovery tank for foam on the first fill, because foam pulled into a vacuum motor damages it.

Work the edges by hand with a handheld pad, because a round pad cannot reach corners. Rinse the pad after each shift and stand it on its edge to dry, so it does not go stiff or matted.

 **Run it with JANITORI chemistry**

 [Floor Cleaner No.61](/products/floor-cleaner-janitori-no-61)

The everyday solution for the wet-clean step. It is pH-neutral, low-residue and low-foam at label dilution, needs no rinse under normal conditions, and is labeled for mop or cleaning-system use on concrete, stone, ceramic, wood, laminate, marble, granite and terracotta. Mix at the label rate, and test on a hidden area if your floor type is not on that list.

 [Degreaser MAX No.72](/products/degreaser-max-janitori-no-72)

For greasy concrete zones such as loading docks and shop bays. It is labeled for concrete, metal, stone and plastic, and rinses residue-free hot or cold. Use it on the greasy area before the buffer pass, not as the routine floor cleaner.

## Which Floor Buffer Pad Should You Use for Each Job?

Use a red pad for daily cleaning, a white pad for spray buffing and a black pad for stripping finish. The darker and more aggressive the pad, the more finish it removes, so choose the least aggressive pad that does the job.

 | Task | Common pad | Note

 | Daily cleaning | Red | Aggressive enough to lift soil without removing layers of finish

 | Spray buffing | White | Restores shine with a spray-buff solution

 | Stripping old finish | Black | Most aggressive pad; needs a stripping chemical and a slurry pickup

 | Grouted or uneven tile | Scrub brush | Bristles reach into grout lines where a flat pad rides over them

Do not run an aggressive pad dry, because it can damage both the floor and the machine. Replacement pads and drivers are in [floor pads and drivers](/collections/floor-pads-drivers), and brush options are in [machine brushes](/collections/machine-brushes).

## How Do You Steer a Floor Buffer Without Fighting It?

You steer a buffer with handle weight, not arm strength. The wheels are off the floor while it runs, so pressing down on the handle swings the machine one way and lifting slightly swings it the other.
- **Relax your grip.** A rotary machine is powerful and will win a tug of war, so let it swing and guide it.
- **Swing, then advance.** When the machine has moved about 45 degrees from where it started, shift the weight to send it the other way, and take a slow step forward each time.
- **Keep the cord behind you.** Uncoil it first, and drape it over a shoulder or keep it clear of the pad so you never run over it.
- **Stop by releasing.** Buffers use safety levers that you hold to run the motor, so letting go is the way to stop. Confirm how your model behaves in its manual.

## Should You Use a Rotary Buffer, a Random-Orbit Machine or a Burnisher?

Use a rotary buffer as the all-round workhorse, a random-orbit machine when swirl marks and easy handling matter, and a burnisher only for polishing finished floors. Each of these machines is in the Janitori catalog.

 | Need | Machine | Listed specs

 | Everyday strip, scrub, spray-buff and bonnet work | [Mercury Hercules H-20E](/products/mercury-hercules-super-heavy-duty-floor-machine-20-apron-175-rpm-1-5-hp-a-c-triple-planetary-transmission-model-h-20e) | 20 in apron, 175 RPM, 1.5 HP, triple-planetary transmission, 5-year warranty

 | One machine for scrubbing and for spray buffing | [Mercury Cleanmaster TS-19](/products/mercury-cleanmaster-dual-speed-floor-machine-19-apron-175-300-rpm-1-5-hp-d-c-rectified-model-ts-19) | 19 in apron, switchable 175 or 300 RPM, 1.5 HP D/C motor

 | Occupied hospitals, schools and hotels | [Mercury Lo-Boy L-20E](/products/mercury-lo-boy-ultra-quiet-floor-machine-20-apron-175-rpm-1-5-hp-a-c-gearbox-under-apron-model-l-20e) | Gearbox under the apron for a low profile and quiet running, 175 RPM

 | Random-orbit scrubbing and restoration | [Dapper Supply 13 in random orbit DP-FM1303](/products/dapper-supply-13-heavy-duty-multi-functional-floor-buffer-polisher-machine-dp-fm1303) | 13 in path, 1440 RPM, 350W motor, 43 ft cord, optional 1 gal solution tank

 | Smaller rooms and edges | [Dapper Supply 10 in random orbit DP-FM1306](/products/dapper-supply-10-heavy-duty-multi-functional-floor-buffer-polisher-machine-dp-fm1306) | 10 in path, 1440 RPM, 500W motor, 43 ft cord

 | High-gloss polishing of finished floors | [Dapper Supply 20 in burnisher DP-FB1305](/products/dapper-supply-20-heavy-duty-high-speed-commercial-floor-burnisher-dp-fb1305) or [Mercury Ultra 20 in burnisher](/products/mercury-ultra-d-c-high-speed-floor-burnisher-20-pad-1500-rpm-1-5-hp-d-c-rectified-50-ft-cord-model-dc-20-1500) | 20 in pad, high-speed; the Mercury runs 1500 RPM, 1.5 HP

Browse the full range in [floor machines](/collections/floor-machines) and [floor burnishers](/collections/floor-burnishers). On a large open floor, an auto scrubber cleans and recovers in one pass, and [how to pick the best commercial floor scrubber](/blogs/equipment-guides/best-commercial-floor-scrubber) shows how to size one.

## What Mistakes Damage a Floor When Buffing?

The common mistakes are skipping the dust mop, running an aggressive pad dry, using too much chemical, and leaving solution on the floor. Each one either scratches the surface, leaves residue or creates a slip hazard.
- **Skipping the dry pass.** Grit under a spinning pad acts like sandpaper.
- **Too much cleaner.** Extra product leaves residue and can make the floor look worse than before. Follow the label rate.
- **Leaving the machine on a pad.** A machine left resting on its pad or brush can bend the bristles or flatten the pad.
- **Leaving the floor wet.** OSHA requires the floor of every workroom to be kept clean and, to the extent feasible, dry ([29 CFR 1910.22(a)(2)](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.22)). Recover the solution and keep signs up until the floor dries.

## Frequently Asked Questions

## How do you use a floor buffer for the first time?

Dust-mop the floor, fit a red pad for cleaning, lower the handle to hip height, and start the motor with both hands on the levers. Let the machine swing and steer it with handle weight rather than muscle, and work in overlapping passes.

## What is the difference between a floor buffer and a floor polisher?

The terms overlap. A rotary buffer is the low-speed workhorse for cleaning, scrubbing and stripping, while a burnisher is a much faster machine used to polish finished floors to a high gloss.

## What pad color should you use on a floor buffer?

Red is the usual choice for daily cleaning, white for spray buffing and black for stripping finish. Color codes differ a little between manufacturers, so check the pad label.

## Can you use a floor buffer on concrete?

Often yes, with a scrub brush or an appropriate pad and a cleaner labeled for concrete. Confirm with the machine maker, and recover the solution afterward.

## How do you keep a floor buffer from running away from you?

Keep the handle at hip height, hold it loosely and shift weight to steer instead of pushing. If you lose control, release the safety levers, which are designed to cut the motor, and check your model's manual.

## Related Guides
- [How to Strip and Wax a Floor: A Commercial Guide to Machines, Pads and Finish](/blogs/equipment-guides/how-to-strip-and-wax-a-floor)
- [How to Use a Floor Scrubber: Step-by-Step Auto Scrubber Guide](/blogs/equipment-guides/how-to-use-a-floor-scrubber)
- [How to Clean a Commercial Concrete Floor](/blogs/equipment-guides/how-to-clean-a-concrete-floor)
- [How to Clean Epoxy Floors: A Commercial Guide to Safe Cleaners, Pads and Scrubbers](/blogs/equipment-guides/how-to-clean-epoxy-floors)
- [How to Clean Terrazzo Floors: A Commercial Guide to Routine, Cleaners and Machines](/blogs/equipment-guides/how-to-clean-terrazzo-floors)
- [Best Commercial Floor Scrubber: How to Pick One for Your Facility](/blogs/equipment-guides/best-commercial-floor-scrubber) [Shop Floor Machines](/collections/floor-machines) [Shop Floor Cleaner No.61](/products/floor-cleaner-janitori-no-61)