# Hawk Enterprises G2 Raptor Rectangular Orbital Floor Machine — 20" x 14" Head, 1740 RPM Orbital, 1.5 HP TEFC AC (Model F98-RAP)

> The G2 Raptor is the chemical-free stripping answer for facilities that cannot flood a floor with stripper or shut a building down for a wet strip-out. An eccentric balanced orbital drive moves a 20 x

- **URL:** https://janitori.com/en-us/products/hawk-enterprises-g2-raptor-rectangular-orbital-floor-machine-20-x-14-head-1740-rpm-orbital-1-5-hp-tefc-ac-model-f98-rap
- **Type:** Floor Machine
- **Brand:** Hawk Enterprises
- **Price:** 2280.16 CAD
- **Availability:** check store
- **Tags:** Brand: Hawk Enterprises, Brush / Pad Speed: Burnish (1500 RPM +), Cleaning Width: 20 in, Hawk Enterprises, jt-equipment, Run Time: Corded - unlimited, Size: 14 in, Size: 2 in, Size: 20 in, Size: 8 in, Type: Floor Machine, US-Only, wave-5

## Description

The G2 Raptor is the chemical-free stripping answer for facilities that cannot flood a floor with stripper or shut a building down for a wet strip-out. An eccentric balanced orbital drive moves a 20 x 14 inch rectangular pad at 1740 RPM — roughly ten times the pad speed of a rotary — so finish comes off mechanically, wet or dry. The rectangular head is the practical difference from a disc machine: it reaches square into corners and runs flat along baseboards, so there is far less edge work left behind. Four primary industrial vibration isolators plus a 194 lb chassis keep operator fatigue down on long runs, and an optional active vacuum kit converts it to a dust-controlled dry stripper. At 9 amps it stays on a standard building circuit.
- Eccentric balanced orbital drive turns the pad at 1740 RPM — about ten times the pad speed of a rotary machine — for chemical-free finish removal.
- 20 in x 14 in rectangular head reaches into corners and runs flat along baseboards, cutting the hand edge-work a round machine leaves behind.
- 1.5 HP 180-frame TEFC dual-capacitor AC motor on 115-230V 60 Hz, 9.0 amp draw — runs on a standard building circuit.
- 194 lb machine weight delivers 0.657 lb per square inch of pad pressure without add-on weights.
- Four primary industrial vibration isolators plus a 2 in isolator-mounted handle carriage keep hand-arm vibration and operator fatigue down.
- Works wet or dry: dry stripping, scrubbing, sanding and stone polishing off the same head.
- Milled dust-control connector on the head; optional Active Vacuum Kit (#TH1011-RAP) adds a 6 quart tank vac, dust skirt and hoses for dust-controlled dry stripping.
- Optional 2.5 gallon handle-mounted solution tank (#A001-RAPBLK 2.5) and 20 x 14 orbital scrub brush (#A0076-2014).
- Heavy-duty steel handle with adjustable lock, dual steel operating triggers, thumb-operated safety switch, 2 in x 8 in non-marking ball-bearing wheels.
- 50 ft 12-3 two-piece industrial cord with cord lock; 66 dB average operation, meets GS42; UL/CUL listed.

## Images
- https://cdn.shopify.com/s/files/1/0730/0281/1559/files/2014RAPTOR-F-RAP2014.jpg?v=1786316496
- https://cdn.shopify.com/s/files/1/0730/0281/1559/files/F98-RAP-REAR.jpg?v=1786316496
- https://cdn.shopify.com/s/files/1/0730/0281/1559/files/F98-RAP-DRIVE-PLATE-VIEW.jpg?v=1786316496
- https://cdn.shopify.com/s/files/1/0730/0281/1559/files/F98-RAP-SIDE-VAC-PORT.jpg?v=1786316497